Pto Driven Wood Pellet Line

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of pto driven wood pellet line in China. If you're going to buy cheap pto driven wood pellet line made in China, welcome to get more information from our factory. All our products are with high quality and low price.

Make your own wood pellets line
The molding density of biomass pellets is an important index of biomass pellets, which is related to the shape quality and natural stacking density of biomass pellets, at present, the density of wood pellet fuels produced in many regions is in the range of 1.1~1.3.

The fuel pellets produced by the production line can be burned directly in the boiler instead of coal, and the emission of exhaust gas after combustion is far lower than the standard, which is a new type of environmentally friendly fuel. As a new type of clean energy, biomass fuel has won wide recognition for its advantages of high calorific value, low ash content, high energy efficiency and no pollution.

The moisture of raw materials, when harvesting the corn stalks are dry, but the moisture is about 15-20%, the moisture is too high, can not be processed. So the choice of raw material is very important, or you can buy drying equipment.

Mobile pellet line

Making wood pellets line
During the production process, we use a twin-shaft extrusion pelletizer to increase the contact area between the raw materials and the die holes, which can effectively increase the yield of biomass pellets.
If the yield of biomass pellets is very low, then we need to adjust the ratio of biomass pellets. The yield of biomass pellets has a lot to do with the ratio of raw materials. If the ratio of raw materials is not right during the production process, it will affect the yield of pellets. For example, we need five kilograms of sawdust to produce one ton of pellets. If the raw material ratio is not right, one ton of pellets may only have two kilograms, or more than two kilograms. Therefore, we need to constantly adjust the raw material ratio during the production process to ensure the yield of biomass pellets.

Mobile wood pellet line

Mini wood pellet line

If we want to increase the output of biomass pellets, we can first understand the process of biomass pellets, and then improve the equipment according to the process to reduce some unnecessary waste. For example, adding a set of pelletizing equipment, or adding some additives during the production process, can increase the output of biomass pellets.
Different raw materials have different characteristics, different fiber structures, and different degrees of difficulty in molding. For example, palm is a material that is difficult to press, and wood chips have their own bonding effect at a high temperature of 80 degrees, so no adhesive is required. In addition, if it is a mixed material, the mixing ratio of each material will also affect the molding rate.

Qualifications and Honors

Hot Tags: pto driven wood pellet line, China, manufacturers, factory, cheap, low price, made in China, Screw Oil Press Machine, multifunctional harvester, manure spreader, Pet Feed Making Machine, Steamed Stuffed Bun Making Machine, Garlic Paste Making Machine