Commercial chipper

The large integrated crusher can process a wide range of raw materials, such as small diameter wood, branches, hardwood, log core, building templates, as well as a variety of straw, cottonwood, crops and so on. The large integrated crusher is equipped with a chain-plate feeder, which can automatically adjust the feed rate according to the motor load, avoiding the machine from idling or running at full capacity.

Large integrated crusher is the ideal equipment for biomass power plant, and large machinery with good overall performance, equipped with vibration damping device, stable operation, low noise. Comprehensive crusher feeding quickly, high efficiency, hydraulic material box flip device, can be in need of maintenance or knife change, large angle flip back part of the exposed operation is convenient.

The wood crusher allows waste wood to be utilized for a second time, in the crushing operation will be the waste wood on the steel nails and iron pieces, etc. to get rid of, convenient and quick to save energy and environmental protection machinery and equipment.

Yard chipper

Equipment parameters

Model	Diameter(mm)	Size of inlet(mm)	Quantity of blades	Working capacity(t/h)	Power	Rotating speed
Model	Diameter(mm)	Size of inlet(mm)	Quantity of blades	Working capacity(t/h)	(kw)	Rotating speed
AC-500	1500650850	200*180	4	1-2t/h	15	2200r/min
AC-600	15007001000	230*210	4	2-3t/h	18	2200r/min
AC-700	15507501050	240*240	4	2.5-3t/h	22	2100r/min

Commercial chipper shredder

Put the wood material into the feed port evenly, and avoid putting too much at one time to avoid blockage.
According to the processing capacity of the equipment, reasonably control the feeding speed to ensure the crushing effect and the normal operation of the equipment.
Always pay attention to the operation of the equipment. If there is any abnormality, stop the machine immediately for inspection.
It is strictly forbidden to approach the feed port and discharge port when the equipment is running to avoid accidental injuries.
Before stopping, stop feeding first and let the equipment process the remaining materials.
After the equipment stops running completely, turn off the power.

Industrial wood shredder

Great circle chipper shredder

1. Regular cleaning
Regularly clean the residual materials and dust inside the equipment to keep the equipment clean.
2. Lubrication and maintenance
Lubricate and maintain the key parts of the equipment in accordance with regulations to extend the service life of the equipment.
For example, workers in a wood processing plant strictly follow the above steps when using a wood crusher. Carefully check the equipment before each use, feed evenly and control the speed, observe closely during operation, and do a good job of cleaning and maintenance after shutdown. Therefore, the equipment maintains a good operating condition for a long time, improves production efficiency, and also reduces maintenance costs.