The higher the molding rate of the pellet machine, the higher the qualified rate, and the more profit it can create. Therefore, the user is pursuing the high forming rate when using the wood pellet machine. How to ensure the forming rate of wood pellet machine?
1. Try to use soft wood chips to make pellets. Many soft wood chips are easier to press, which can effectively improve the forming rate.
2. The best raw material moisture for the wood pellet machine is 15%-20%. If the moisture is too high, the extruded particles will be loose and easily broken during packaging and transportation. If the moisture is too low, it will lead to The particles are difficult to press together, the particle forming rate is low, and the powdery material is too much.
Therefore, it is recommended that you reduce the moisture of the material by drying or drying, and increase the moisture of the material by adding moisture. In the molding process of the wood pellet machine, the improvement of the pellet molding rate can save a lot of raw materials, reduce the production cost and increase the user's profit. At the same time, in the operation, it is necessary to strictly follow the operating procedures to reduce errors.