The wood chipper must be properly used in the process of use, and it must be maintained regularly in order to better exert its effect and prolong its life. By extension, this is the case with any machine. Most wood processing operators After purchasing our wood chipper and wood debarker, you can directly put it into production, and run the equipment around the clock to generate greater profits. Although these machines do not need to eat, drink and rest like cattle and horses, but long-term continuous work also needs to stop and rest. Avoiding continuous operation for too long is an important maintenance for the machine.
We know that whether it is a wood chipper, a wood peeler, or other wood processing machinery such as a wood shredder, the core of their power is the motor, and the motor is especially important! The price of the motor is not cheap. It is one of the core components. The high-power motor is very expensive. Due to the universality of the motor, consumers who buy wood processing machinery products must understand how to maintain the motor. Whether it is a wood processing machine, a chipper or a peeler, it is inseparable from it. Take explosion-proof motors as an example, we all know that explosion-proof motors have gradually become popular because they are safer and have no sparks, but nothing can guarantee complete safety, so there are also precautions for use. The motor is assembled and soaked. When painting, there is an explosion-proof surface. The dust, insulating paint and other stolen goods on the explosion-proof surface should be disposed of. In order not to damage the explosion-proof surface of the motor, use whetstone to grind those uneven places, and never use iron sheets. hard objects to scratch.
Environmentally friendly wood chipper is our main product. We have very high requirements for its safety and strict testing. At the same time, we provide consumers with technical knowledge of training and maintenance when they buy them. Consumers can also pay attention to our website at any time. , we will update technical information from time to time. A dynamic emerging industry in the environmental protection wood chipping machinery industry. After more than ten years of development, the product structure, performance and quality of the environmental protection machinery industry have been significantly improved, and the domestic environmental protection equipment has become mature. Regarding some precautions when using the wood chipper, Zhengzhou Jinpeng will give you a brief introduction here.
The wood chipper is half material: don't worry about this reason, you can observe that there is a small round hole with the size of a fist under the pulley of the main machine, and there is also a small hole in the opposite direction. Open the round hole cover before the machine is running, and the round hole in the opposite direction is for connecting the induced draft fan. After the wood chipping machine is running, the round hole cover under the pulley is not opened or not fully opened. The machine is against the side of the pulley, and the material will be blocked inside. , The solution is to fully open the round hole cover under the pulley, so that the induced draft fan will draw the air from the outside of the machine body, and the material on one side will be introduced into the induced draft fan and sent out of the body.