What should we do if these problems occur in the automatic oil press?
With the improvement of our life quality, the oil pressing workshop is getting closer to our life. We can purchase or grow our own raw materials to squeeze the edible oil in the oil pressing workshop. With the gradual increase of the number of people pressing oil, many oil pressing workshops have been replaced by full-automatic oil presses, which are easy to operate and save labor. Next, Xiaobian will explain to you the daily problems and solutions of the automatic oil press. I hope this will help you!
1. Low oil production rate of full-automatic oil press
If the oil residue cake is too thick or too thin, the thickness of the oil residue cake can be adjusted appropriately; If the raw materials are heated too high or too low, the raw materials can be cooled or heated to a suitable temperature; If the machine temperature is too high or too low, the machine temperature can be adjusted to a suitable temperature; If the oil content of raw materials is low or the magazine is too large, the biscuits made of raw materials can be dried.
2. The oil residue of the full-automatic oil extractor is discharged from the bar press, in the form of noodles
If the oil residue cake is too thin, adjust the extrusion strip interval; If the raw material temperature is too high, adjust the thickness of oil residue cake; Large spacing of extrusion strips reduces the temperature of raw materials.
3. Oil residue cake cannot be discharged
Adjust the thickness of oil residue cake if it is too thin; The machine temperature is high, the water content is low, and the raw material temperature is reduced; The raw material has high temperature and little water.
