Do not think that what seems simple is actually not simple, the feed pellet machine from the beginning of the feeding to the discharge of the whole process, it is necessary to pay attention to a few points:
We all know that cultured animals feed on different properties, the use of raw material particle size is also different. The crushing size of the raw material is also related to the diameter of the grinding disk hole in the pellet machine. Generally on the conventional feed suppression diameter is generally in the 6mm or so, less than 6mm belongs to the special poultry attribute particles, while the general conventional feed suppression are within the range of 6mm. In addition to the different particle size of raw materials, we also have the water content of raw materials. If the water content is not taken into account, it is very likely that the finished feed pellets will be soft and unshaped, which will lead to poor feed intake. It is recommended that the water content of raw materials is controlled at about 13%, so that the finished feed pellets are good and full.
