The molding molds of the RDF molding machine are closely arranged in a ring layout, and a material molding channel is formed between two adjacent molds. In this way, the whole machine forms a radially distributed material forming channel. The forming pressure wheel makes planetary motion driven by the main power, driving the material to be fed into the mold inlet. As the pressure wheel gradually approaches the point of cutting into the mold, the fed material is squeezed into the mold channel under the normal pressure of the pressure wheel, and continues to stack in the channel to form pressure, and finally exits the mold in the form of the finished product, completing the entire molding process.
|
Model |
Power |
Capacity |
Briquette size |
Hole quantity |
|
MK-550 |
55kw |
1t/h-1.5t/h |
32*32mm |
36pcs |
|
MK-750 |
75kw |
1.5t/h-2t/h |
32*32mm |
54pcs |
|
MK-900 |
90kw |
2t/h-2.5t/h |
32*32mm |
72pcs |
|
MK-1600 |
160kw |
2.5t/h-3t/h |
32*32mm |
120pcs |
Product advantages:
1. The mold has a large number of apertures and a large processing capacity; the structure is simple, the maintenance is simple and convenient, and the maintenance frequency is low.
2. Dynamic heating molding, the molding effect is good; pressure molding, the finished product will not loosen its shape.
3. The radial gap between the pressure roller and the mold is easy to adjust to ensure the appropriate gap between the pressure roller and the mold.
4. The material has strong adaptability and can be processed from powder to 50mm length.