1. Too high temperature
During the operation of the feed pellet machine, heat will be generated due to friction and other reasons. If the temperature is too high, it may cause equipment damage. At this time, it is necessary to check the lubrication and heat dissipation of the equipment, and adjust the feed amount and material humidity to ensure the normal operation of the equipment.
2. Feed pellet machine blockage
During the feed processing process, if the feed pellet machine is blocked, it will affect the normal operation of the equipment. At this time, it is necessary to stop the machine for inspection, clear the blockage, and restart the machine.
3. The pelleting effect of the feed pellet machine is not good
The reason for the poor pelleting effect of the feed pellet machine may be that the humidity of the feed raw materials is too high or too low, the mold is worn, etc. At this time, it is necessary to check the humidity of the feed raw materials, replace the worn mold, etc., to ensure the normal pelleting effect of the feed pellet machine.
4. Abnormal sound of the pellet machine
When the feed pellet machine makes an abnormal sound during operation, it may be due to bearing failure, loose machine, foreign matter entering, etc. At this time, it is necessary to stop the machine for inspection, find out the fault point, replace the bearing, fix the loose part of the machine, remove foreign matter, etc.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
5. Uneven feeding
If the feeding is uneven, it will affect the pelletizing effect and equipment life of the feed pellet machine. At this time, it is necessary to check whether there are faults in the feed port, feeder and other parts, and adjust the feeder to ensure uniform feeding.
6. Motor overload
Motor overload may be caused by excessive equipment load, motor damage, transmission system failure and other reasons. At this time, it is necessary to stop the machine for inspection, find out the fault point, replace the damaged motor, repair the transmission system, etc.
7. Mold wear
After long-term use, the mold will wear out, resulting in poor pelletizing effect of the feed pellet machine. At this time, it is necessary to check the mold wear and replace the worn mold to ensure the normal pelletizing effect of the feed pellet machine.