Often use feed pellet machine friends will notice that the feed pellet machine is very easy to current instability, a lot of friends in the encounter this situation is very anxious, do not know what to do, in fact, as long as you understand why the current is unstable, it will make things very simple. The most common causes of this failure are most likely to cause the gap between the pressure shaft ring die is not adjusted, or the distribution of materials is not uniform enough, there are many times we are dealing with recycled semi-finished products and materials, if there is too coarse powder inside, it will produce current instability. Of course, the raw materials and additives if the mixture is not uniform enough, or the elasticity of the conveyor belt often change, will also lead to the emergence of the above problems. We have to deal with these problems in time, otherwise it is very easy to appear for the overall damage to the machine phenomenon.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
Even in some cases, the feed pellet machine will not start up, then how do we deal with this time, we should check whether the power supply is normally energized, this is a situation, there is a safety pin is not broken, if the travel switch is not in place, the machine will not start up. A lot of times we usually close the door on the end, in fact, if the door is not closed, there will also be a feed pellet machine start up the situation. So many problems, as long as we usually pay more attention in the use, can be avoided.