The feed pellet mill promotes the formation of pellets through the extrusion of the attachment pressure rollers and molds. If the spacing is not appropriate, the pellet maker will not discharge properly. The solution is to adjust the spacing appropriately.
There is a buildup in the pellet maker. After the granulator is produced, there will be some deposits and no clean residue. After the next run of the granulator, it will solidify into hard lumps due to the higher temperature, so the granulator will not be able to discharge properly. The solution is to clean the inside and remove the residue. These are the reasons for the feed pelletizer not discharging, we should learn to specifically analyze the reasons and solve the faults to ensure that the equipment can run normally.
