Pellet machine control cabinet alarm light alarm, check whether the filter is clogged, clogging replacement. Check if the oil circuit is clogged. If clogged, blow out with high pressure air pump. Check if the oil pump is damaged. If damaged, replace. Check whether there are air bubbles in the oil pipe. If there are many air bubbles, the oil is not standardized. Select heavy-duty gear oil according to the lubrication standards. Do not use vat oil. Most vat oils are produced by small manufacturers with no guarantee of quality.
Choking machine of pellet machine
Causes of this fault: excessive selection of the compression ratio, uneven feeding of the material, too fast speed, unstable dryness and wetness of the material, loose clearance of the pressure rollers, impurities in the material (for example, iron, stones and large wood). If you previously determine whether there is a change in the material under normal conditions, you should adjust the mold compression ratio after replacing the material with a larger proportion of material.
