The specific difference between round row and strip row of oil press machine
Bar row oil press and round row oil press collectively referred to as screw oil press, today we Yuan Tong machinery to help you analyze the bar row type of oil press, and round row type of oil press differences and characteristics, I hope to buy oil press friends help!
There is no heating device in the round row type screw oil press, but then the manufacturer of the round row type screw oil press saw this, so it is mandatory to install a heating device on the round row type screw oil press, that is why there is a heating device on the round row type oil press, in fact, this heating device does not play a role, the round row of the round row type screw oil press is very thick, and the heating device can only heat the outside, and the temperature inside the host machine is not even close to the temperature, but the heating device can only heat the outside. The heating device can only heat the exterior, the temperature inside the host can not be heated at all, the two main factors needed for oil extraction is the temperature and pressure, so this is the round row screw oil press simply can not be done; strip-type oil press can be easily done, its heating device design is quite reasonable, the highest host temperature can be heated up to 300 degrees, whether it is a kind of oil crops, what kind of temperature is needed, it can be automatically adjusted, so from the heating device, it can be automatically adjusted, so it can be automatically adjusted. No matter which kind of oil crops, what kind of temperature is needed, it can be adjusted automatically, so the strip-row type is much more advanced than the round-row type in terms of heating.
Another is the problem in the process of oil extraction, round row type screw oil press in the process of oil extraction is strictly reversed, that is to say, it does not have a reversing system, if in the process of oil extraction in the process of too much material down the screw shaft is jammed, or a sudden power outage, then it is very troublesome, it has to be the entire chamber apart, the inside of the spindle all pumped out, manpower inside the oil crops, clean up, and then put the host back to work, it is not a good idea to do so. Clean up, and then reassemble the mainframe, so it is quite troublesome to encounter this kind of situation; strip-row type oil press is much more advanced, it has a reversing system, as long as the above situation occurs, as long as gently press the electric reversing button can be, the machine will take the initiative to the inside of the oil crops easily to pour out, the operation is quite simple and convenient, do not need to dismantle any parts.
On the whole, the bar row type screw oil press is higher than the round row type screw oil press, the output is larger, the operation is simpler, so that the round row type screw oil press is nowadays called the old-fashioned oil press.
