The installation and commissioning of hydraulic oil press is very important
For customers, the installation and commissioning of hydraulic oil press is also a very concerned issue. In fact, customers don't have to worry about this because the manufacturer will install, debug and grind before leaving the factory! However, the customer is good after receiving the oil press with coarse sand grinding 1-2 hours, in order to achieve a smooth effect!
In fact, when many customers bought our hydraulic oil press and tested the machine on site, the oil yield rate was very high and they were very satisfied. Then they bought our oil press equipment. After our staff installed and adjusted the machine locally, the oil yield rate was still very high, but another part of customers did not operate according to our operation process. We say that our equipment's oil output rate is not good, and then we send technical personnel to check and see that the users in the oil pressing workshop do not operate according to the prescribed operating process and operate according to the operating technology they think, which then leads to some sharp wear and tear of the equipment parts. So in many cases, we will provide the users with reliable operation instructions and operation instructions and precautions.
