As people's demand for feed pellet machines continues to increase, there are more and more manufacturers producing feed pellet machines. Among them, there are inevitably some bad merchants who produce some inferior equipment for personal gain.
What is the impact of using inferior feed pellet machines on the pellet feed produced?
| Model | Main Power | Capacity(kg) | Size(cm) |
| 125 | 4KW | 60-80 | 105*34*61 |
| 150 | 4KW | 100-120 | 105*34*61 |
| 160 | 4.5KW | 120-150 | 105*34*61 |
| 210 | 7.5KW | 150-300 | 120*44*76 |
| 230 | 11KW | 300-500 | 120*48*80 |
First of all, these inferior feed machines not only have rough processing quality, but also have a relatively low service life. Therefore, in actual application, it is difficult for production equipment to ensure a good and stable operation state. During the investigation, we found that after these equipments have been running for a period of time, the accessories of various parts will show different degrees of wear, and the frequency of bearing damage is very high.
Secondly, there will be problems such as oil leakage, and more seriously, the main machine will often have different faults. In this way, not only is it difficult to maintain stability in the production of feed machinery, but also the output is seriously reduced.
Therefore, in actual use, these feed machines not only affect the processing quality of feed pellets, but also are not wear-resistant, and are prone to cracking and other problems. In short, I hope everyone will carefully distinguish when purchasing and do not buy inferior equipment.