The correct way to use feed extruder equipment
Expansion equipment use
(1) box bearings should be filled with lubricating grease in a timely manner, after 500 hours of operation, to replace all the lubricating grease. (The new machine should be appropriate to participate in grease before operation, after 200 hours of operation should be oil change.)
(2) Other bearing parts should be filled with grease regularly.
(3) screw, screw sleeve and other wear parts in the disassembly process is prohibited with a hard object hammer, in the expansion chamber is prohibited to place heavy objects or stand people.
(4) puffed material should be sorted through, beware of metal and other foreign objects into the machine damage to the machine parts.
(5) at any time to check the quality of puffing equipment, pay attention to the replacement of wearing parts.
(6) adhere to the equipment around the cleaning.
(7) a long period of downtime or replacement of puffed materials, should be cleaned up the puffing cavity of the material, to avoid lumps, mold and perhaps interspersed between the material contamination.
(8) Because of the wear and tear of the wearing parts close to the discharge port is relatively fast, close to the feed port end of the wearing parts less wear and tear, so in the replacement of wearing parts, should be replaced from the discharge end of the beginning of the replacement in turn, should not be replaced at a time a variety of parts.
feed extruder
feed extruder