Whether the feed pellet machine is installed reasonably is related to the entire process of feed production and the quality of the feed. Therefore, when disassembling the feed pellet machine, you must follow the instructions and must not disassemble it randomly, which will cause various faults in the feed pellet machine. In order to avoid unnecessary trouble, the following seven points must be kept in mind during the disassembly of the feed machinery. The structural principle of the disassembled machine or component should be clarified to avoid damaging the machine parts.
1. Before disassembly, the surface dirt and oil should be removed, and the disassembly process should be kept clean.
| Model | 45 | 65 | 75 | 85 |
| Power | 5.5KW | 15KW | 18.5KW | 22KW |
| Yield | 140-160 | 200-240 | 260-320 | 450-550 |
| Weight | 350KG | 500KG | 550KG | 750KG |
| Capactiy | 50KG/H | 150KG/H | 200-300KG/H | 400-500KG/H |
| Size(mm) | 1800*810*1080 | 1700*970*1240 | 1700*970*1240 | 1850*1070*1400 |
2. Use appropriate tools when disassembling, and do not hit or knock hard to avoid damage or deformation of parts.
3. Disassemble as needed, disassemble as little as possible, and do not disassemble if disassembly is not allowed.
4. Be prepared for assembly when disassembling. In order to improve assembly efficiency and ensure the correctness of assembly, you should pay attention to checking and marking when disassembling.
5. Disassembly should be carried out in a reasonable order, generally from accessories to main parts, from outside to inside, first disassemble the whole machine into assembly, then disassemble the assembly into components, and then disassemble the components into parts.
6. After blood sampling, the parts should be classified and stored according to the material properties and the precision of the parts.