When the pellet machine is used for a long time there will be a variety of problems, for example: the pellet machine feed is not stable, like this situation, mainly from these four aspects:
Discharge sometimes out, sometimes not, this is generally related to the aging degree of the pellet machine die ring and grinding roller. Check the cutter. The gap between the knives must be suitable. Problems with the die ring and grinding rollers, just bought a new machine die ring and grinding rollers need to be ground, so the new machine needs to be ground with materials with added grease, in general, the moisture of the material should be controlled between 15-20%, adjust the gap between the pressure wheel and the die plate so that it reaches about 2 millimeters, and the fixing bolts must be screwed to death after adjusting the pressure wheel.
Pellet mill motor reversal. Motor reversal will be dangerous. Operate with care! Users often do not pay attention to keep the pellet machine clean, which speeds up the service life of the pellet machine. Choose the right die ring and grinding roller aperture of the pellet machine. Some users use too small aperture, and often have low output, or even no material, I hope to ask carefully when buying pellet machine.
