Reasons for high temperature of pellet machine and ways to reduce temperature
When the pellet machine is working, it may be due to the dusty working environment and continuous work, the temperature will be too high, so let's take a look at the reasons for the high temperature of the pellet machine and the methods of cooling down!
Reasons for high temperature:
1, the natural climate and high temperature of the working environment, resulting in higher lubricant temperature in the equipment.
2, the tank volume is too small, the cooling area is not enough, the cooling device solvent is small is also the cause of high temperature.
3, according to the lubricant into the speed selection of quantitative oil supply automatic system, this work will have most of the flow restricted to high pressure and heat from the safety valve discharge.
4, pellet machine equipment ring die and pressure roller gap of the inappropriate or small gap, or long-term wear and tear resulting in large spacing, a large amount of lubricant leakage, resulting in loss of capacity, the automatic oil supply system efficiency will be reduced, the temperature rises rapidly.
Methods of temperature reduction:
1, according to different load requirements, check and adjust the pressure of the safety valve of the pellet machine to make it correct.
2, select the hydraulic oil, sliding oil viscosity, especially in the conditions allow, try to reduce the friction loss with lower viscosity viscosity.
3, improve the lubrication conditions of the moving parts of the pellet machine, in order to reduce the friction loss, help to reduce the workload, reduce the heat. If necessary, you can increase the cooling device.
