1. The preparation of raw materials should be carried out according to the formula provided by the manufacturer to ensure that the quality and proportion of the raw materials meet the requirements. At the same time, the storage environment of the raw materials should be kept clean and dry to avoid moisture and deterioration.
2. When delivering raw materials, the principle of "gradual increase" should be followed. That is, a small amount of raw materials should be delivered for trial production first, and then the amount of raw materials delivered should be gradually increased after the equipment is fully operational. This can avoid equipment overload or failure during production due to too much raw materials delivered at one time.
| Model | 40 | 60 | 70 | 80 |
| Power | 5.5KW | 15KW | 18.5KW | 22KW |
| Yield | 120-150 | 180-220 | 240-300 | 400-500 |
| Weight | 350KG | 450KG | 500KG | 580KG |
| Size(mm) | 1500*1100*1100 | 1600*1300*1250 | 1600*1300*1250 | 1800*1400*1350 |
3. When delivering raw materials, pay attention to controlling the feeding speed to avoid too fast a speed that causes the equipment to be unable to process the raw materials in time. At the same time, pay attention to observe the operation of the raw materials in the production line, such as whether there is any blockage. If a problem is found, stop the machine and clean it up in time.
In the aquatic feed equipment production line, different production processes are suitable for production needs of different scales. When choosing a production process, it is necessary to make a comprehensive consideration based on its own production conditions and needs.
Based on the selection of production process, production efficiency can also be improved by optimizing production parameters. For example, adjust the speed of the feeder, adjust the particle size of the crusher, etc. The adjustment of these parameters should be carried out according to the actual production situation and follow scientific and reasonable principles.