Pellet mill pressure shaft slippage causes and treatment methods
The pellet machine will affect the output value of the produced pellets, and it will also seriously affect the output value of the pellets. Therefore, we need to pay attention to this problem in time to realize the production efficiency and equipment quality. What are the reasons for the slipping of the pressure shaft of the pellet machine? The following editorial introduces us to the biomass pellet machine, the causes of the slipping phenomenon and its treatment.
1 The bearing device of the machine is not flexible, which causes the pressure shaft to slip. When the bearing of the machine is pressurized, the device cannot lose too much, otherwise it will cause the pellet machine to slip in the pelletizing operation. The way to deal with this problem is to always pay attention to the pressure shaft of the pressure roller, even if it is replaced with a new one.
2. When the water content of the pellet material is too high, it will affect the slipping of the pressure shaft. When the material is confined by the machine, the moisture content of the material is too high or the steam generated during the pelletizer can cause the slip of the big end during the pelletizer due to the smoothness of the moisture. The way to deal with this aspect is to reduce the inflow of steam into the material so that the moisture in the material remains within reasonable limits.
3. When the pellet machine pressure shaft clearance is too large, it can affect the time the pellet machine is used for operation. If the gap between the finished products of the machine is not well controlled, it is easy to show that the pelletizing process produces uneven particles, the output value is too small, and the pellet machine pressure roller can not tightly restrict the material.
The above content is my answer to the question of the reason why the pressure shaft of the pellet machine slips. Remember to contact us if you need to order the machine.
