Oil press daily problems and ways to deal with
1. Low oil production rate of automatic oil press
If the slag cake is too thick or too thin, the thickness of the slag cake can be adjusted appropriately; The raw materials are heated too high or too low, and the raw materials are cooled or heated to an appropriate temperature; Machine temperature is too high or too low, machine temperature adjustment suitable temperature; Raw material oil rate is low or impurities are too large, the raw material selection cake drying treatment.
2. The oil residue of the automatic oil press is discharged from the press bar and is in the shape of noodles
The oil residue cake is too thin, adjust the pressing strip interval; If the temperature of raw material is too high, adjust the thickness of oil residue cake; Large press bar interval, reduce raw material temperature.
3, the slag cake can not be discharged
If the grease cake is too thin, adjust the grease cake thickness; High machine temperature less moisture, reduce the temperature of raw materials; The raw material has high temperature and little moisture.
