An Indian customer came to our company on May 10, 2024. We first took the customer to visit our company and factory. After seeing our feed pellet machine products, the customer praised us and expressed his willingness to cooperate with us. At the same time, we also understood When the customer visited other companies many times before, he was not satisfied. For this, we feel honored. Of course, this is also because our equipment is of excellent quality and reasonable price. Therefore, our products are sold all over the world and have a good reputation. reputation.
The customer asked us how to use the feed pellet machine. To this end, we gave the following answer:
Prepare tools and ingredients. It is necessary to prepare two pressure rollers and three pressure roller screws, as well as feed ingredients to be processed, such as corn kernels and bran.
Check the voltage. Make sure the voltage is not lower than 220v to ensure the machine can feed materials normally.
Adjust the pressure wheel screw. Tighten the pressure wheel screw, but be careful not to tighten it too much to avoid excessive load.
Adjust the feeding method. With uniform feeding, feeders can be used to improve granulation smoothness and machine efficiency.
Choose an appropriate template aperture. Make sure to use a template with a moderate hole diameter to avoid low throughput or no discharge problems.
Adjust the gap between the template and the pressing wheel. Adjust the gap between the template and the pressure wheel through the pressure adjusting screw to ensure the quality of the particles.
keep clean. The machine should be cleaned after use and the small feed pellet machine should be kept clean to improve its service life and efficiency.
Lubricate regularly. Regularly add butter and lubricant, and clean the template to ensure the normal operation of the machine.
At the same time, we also welcome friends from all over the world to visit our company or factory. In addition to feed pellet machine products, we also have feed extruders, feed pellet production lines, etc., and we have the ability to provide you with quality products. At the same time, we We will also provide you with wearing parts and regularly send our professionals to your country to solve your problems. You are welcome to contact us at any time.
