Maintenance method of hydraulic oil press
Maintenance steps of hydraulic oil press
1. This machine should be repaired and cleaned regularly.
2. When the hydraulic hydraulic press is running, it should always pay attention to the running state of the machine, and pay attention to regularly check the wearing parts (such as leather bowl, sealing device, steel ball, piston, etc.).
3. When the hydraulic hydraulic press stops using, the machine should be completely wiped clean, coated with grease on the parts prone to rust, and wrapped with oil paper or kraft paper to prevent rust.
4. If there is any problem with the hydraulic hydraulic press, it should be repaired and replaced in time, and the loose nut should be tightened.
