Is The Operation Process Of The Feed Extruder Complicated?

1. The basic principle of the feed extruder
The feed extruder is a kind of equipment that uses high temperature and high pressure conditions to extrude the raw feed, so as to achieve the purpose of sterilization, disinfection, and increase nutritional value. Its basic principle is to process the feed into particles under the action of screw pressure and high temperature and high pressure, so as to improve the utilization rate of the feed.
2. Operation process of the feed extruder
1. Cleaning: Before using the feed extruder, clean the equipment first to avoid contaminating the raw feed.
2. Feeding: Add the cleaned raw feed to the cooker and add an appropriate amount of water according to a certain proportion.
3. Start: Start the feed extruder, adjust the temperature and pressure, and wait for the extruder to preheat.
4. Slag discharge: Slag the steamed feed to remove impurities and imperfect particles generated during the production process.
5. Finished product collection: Collect the processed finished feed.

3. Precautions for feed extruder
1. The feed extruder should ensure the dryness of raw materials and the size of feed should be uniform to ensure pelleting efficiency.
2. When operating the feed extruder, the equipment must be operated normally and the relevant safety operation regulations must be followed.
3. The feed extruder generates a lot of noise and heat in the process of processing feed. Ventilation equipment should be installed as much as possible to ensure the health and safety of the production environment.
4. When cleaning the feed extruder, its power supply must be cut off to avoid accidents and protect the life safety of the operator.
5. During the production process of the feed extruder, attention should be paid to keeping the equipment hygienic and clean to avoid excessive dust and pollution.