Is it normal for the screw oil press to make abnormal noise?
In the process of using the screw oil press, the user will have the abnormal sound of the screw oil press, mainly the abnormal sound in the extrusion room. Is the abnormal sound of the screw press normal?
There are two kinds of noise in the extrusion chamber of the screw press, which need to be analyzed to determine. When the extrusion chamber makes noise, one situation is excessive instantaneous feed. During normal operation, the oil press suddenly feeds too much, resulting in great resistance to the extrusion screw, resulting in extrusion friction and noise between the extrusion screw and the extrusion screw. In this case, only need to stop feeding, extrusion chamber calm, you can continue feeding;
The other sound is a larger sound, there is a serious metal friction sound, the sound is due to the material dry, extrusion into iron powder material, material density makes the extrusion almost blocked, spiral operation is not smooth extrusion, metal friction sound, in this case, the user should decisively switch to reverse mode, let the spiral material slowly poured out from the feed port, so that the spiral oil press to return to normal.
When the screw oil press is abnormal, the user should not close or switch mode in an emergency, which will lead to the complete blockage of the screw oil press. The end result is that it takes a lot of time and manpower to clear the clogged extrusion chamber, delaying a lot of oil pressing work. Therefore, in the case of emergence, should calmly distinguish the reasons, and then make the right solution, so that the screw oil press can achieve longer service life and better work efficiency.
