Introduction To The Conditioner in The Feed Pellet Production Line!

                   In the feed pellet production line, the curing process can effectively sterilize and improve nutrition, thereby improving feed quality. Improving the maturity of granulation is not only related to the selected equipment, but also related to many other factors, such as the crushing particle size of the material, the structure of the ring die hole, the quality of the conditioning steam, and the installation angle of the paddle on the conditioner shaft. , the speed, formula and output of the conditioning shaft, etc. Once the equipment is selected, the optimal parameters should be adjusted according to the actual situation to improve the conditioning effect and the maturity of the granulation. It can also effectively improve the working efficiency of the granulator, reduce the power consumption per ton of material, and obtain more Economic benefits.

                   Cooling is to maintain better storage performance of the product after granulation, and is an indispensable procedure after granulation. When selecting this machine, since the models produced by each factory are similar, you should pay attention to the manufacturing quality, materials and accessories, such as: how effective is the automatic control of the incoming and outgoing material linkage mechanism, and whether the main part is made of stainless steel. The air suction duct should be made of stainless steel sheets, otherwise the service life will be greatly affected by the presence of water vapor, so attention should be paid to it, otherwise it is impossible to obtain the most ideal use effect.