How to use fully automatic bone sawing machine safely?
When installing the saw band of the full-automatic bone sawing machine, pay attention to the direction of the saw blade. The sawtooth tip of the right cutting surface is downward. The blade should press the saw blade, but not touch the saw tip. Otherwise, the noise will increase and the service life of the saw blade will be shortened. The sawdust collection box should be cleaned timely to prevent the meat scraps from overflowing the lower wheel, causing the saw band and saw wheel to slip and fail. When the full-automatic bone sawing machine is not in use, loosen the tension handle of the saw band on the top of the machine for 2 turns, The service life of the saw blade can be extended by screwing it again when the machine is started next time. After the door of the automatic bone saw is opened, the safety switch will stop the machine, but the saw belt will continue to rotate for a while under the inertial action. At this time, do not touch the saw belt with your hands to adjust the saw belt. In order to ensure the normal operation of the machine, it is necessary to ensure that the saw belt really runs on the pulley. In the correct state, the edge of the saw belt tooth front should be in line with the leading edge of the pulley.
Finally, users of Guangda automatic bone sawing machine should be reminded that the machine itself cuts meat with bones or frozen meat, so the sharpness can be imagined. For safety production, please pay attention to the following three points:
1. The start switch and emergency stop switch shall be turned off when the operation is suspended.
2. Nails or other metal objects contained in the cut articles will cause sawtooth cracking or damage, so pay attention to the cutting section during operation to ensure safe work.
3. Keep children away.
Safe production is the pursuit of every fully automatic bone sawing machine manufacturer, so safety protection measures should be paid attention to while operating safely.