In order to ensure the normal operation and extend the service life of straw feed processing equipment, it is necessary to clean, maintain and pay attention to some matters regularly.
Cleaning straw feed processing equipment
Cleaning is the basis for maintaining the hygiene of straw feed processing equipment and an important measure to ensure the operation of equipment. The equipment needs to be cleaned before, during and after use. The specific steps are as follows:
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
Cleaning impurities
First, it is necessary to clean the straw, bran and other impurities on the surface and inside of the equipment to avoid damage to the equipment and affect the quality of feed.
Cleaning equipment
Use clean water and special cleaning agents to clean the equipment, especially the straw fragments and dust in the processing room. When cleaning, try to avoid water entering the electrical appliances and circuits.
Disinfection equipment
After cleaning, the equipment should be disinfected. The disinfectant can be hydrogen peroxide or chlorine-containing disinfectant. After disinfection, it should be thoroughly rinsed to avoid contamination of the feed.