How to increase the output of pellet mill
First, strictly control the nature of the feed. Control the nature of the feed mainly includes three aspects:
1. During the production process, prohibit the strength of too large materials into the pellet machine, prohibit non-crushing materials into the granulation room.
2. Control the composition of the particle size of the material, prohibit the entry of oversized materials, and screening in advance.
3. Control the water content of the material, the water content of the material is large for the sun and drying treatment, in order to prevent the material adherence to the inner wall of the granulation chamber.
Second, improve the rolling form of the pressure wheel determines the production efficiency, power consumption, mold wear, molding quality and other indicators of important factors. By improving the design of the rolling form of the pressure wheel of the pellet machine, proposed to increase the pressure, reduce ineffective wear, reduce the pressure wheel stress and other measures, so that the material in the pelleting chamber is easier to form a pressing area, a single die hole pressure is higher, is conducive to the layering of the material molding, the material yield.
Third, the reasonable working parameters of the granule machine working parameters directly affect the characteristics of the movement of materials, and thus have an important impact on the production efficiency of the equipment, so in the production of the need to pay attention to the working parameters of the equipment is reasonable. In order to the production efficiency of the equipment, the pellet machine pressure wheel and mold design for the overall improvement, and according to the improved pressure wheel, mold and working parameters, so that the mold matches the material, thus the production efficiency of the equipment.
Fourth, the transmission efficiency of the equipment reducer structure of the transmission efficiency affects the production efficiency of the pellet mill equipment. When there is a deviation in transmission efficiency, the actual power used by the equipment will be reduced. When designing the transmission system, the actual useful power can be increased by the efficiency of the transmission system.
Fifth, the operation level of the workers can reasonably understand the condition of the equipment, master the essentials of equipment operation, so as to meet the needs of the pellet machine, so that it can better serve us.
