First, check the equipment
Before starting the commissioning, the first thing to do is to carry out a comprehensive inspection of the feed pellet machine. Check whether the various parts of the equipment is intact, whether the screws are loose, whether the lubrication system is normal and so on. If there are problems need to be dealt with in a timely manner, so as not to affect the progress of debugging and processing out of the quality of the particles.
Second, adjust the size of the mold hole
Mold hole is one of the most important parts of the feed pellet machine, its size directly affects the size of the processed particles. When adjusting the size of the mold hole, you need to use different sizes of mold holes to test and find the most suitable size of the mold hole. Generally speaking, the size of the mold hole can be adjusted by adjusting the distance between the press wheel and the cutter.
Third, adjust the position of the press wheel and cutter
Pressure wheel and cutter are the main working parts of the feed pellet mill, and their position has a great influence on the quality of the processed pellets. When adjusting the position of the press wheel and cutter, it needs to be adjusted according to the nature of different materials and particle size requirements. Generally speaking, the position of the press wheel and cutting knife can be adjusted by adjusting the position of the motor and reducer.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
Fourth, adjust the compression ratio
The compression ratio is an important parameter in the feed pellet mill, which refers to the compression ratio between the press wheel and the cutting knife. When adjusting the compression ratio, it needs to be adjusted according to the nature of different materials and the requirements of particle size. Generally speaking, the compression ratio can be adjusted by adjusting the distance between the pressure wheel and the cutting knife.
Fifth, adjust the feeding speed
Feeding speed refers to the speed of the material entering the feed pellet mill, which also has a great influence on the quality of the processed pellets. When adjusting the feeding speed, it needs to be adjusted according to the nature of different materials and particle size requirements. Generally speaking, the feeding speed can be adjusted by adjusting the rotational speed of the motor and reducer.
Sixth, carry out trial production
In the commissioning, it is necessary to carry out trial production to check whether the quality of processed particles meets the requirements. If the quality of processed particles does not meet the requirements, the equipment needs to be adjusted until it meets the requirements. In the trial production, you also need to pay attention to the operation of the equipment, if the equipment is found to be unstable or abnormal sound, you need to stop the machine in time to check and deal with the problem.
Seven, regular maintenance and repair
In order to maintain the normal operation of the feed pellet mill and extend its service life, regular maintenance and repair is required. For example, regularly check whether the various parts of the equipment is intact, whether the lubrication system is normal and so on. Also need to pay attention to the cleanliness of the equipment, in order to prevent material residue damage to the equipment.