Feed pellet machines generally refer to granulators and pellet mills. The die head is an important part of the feed pellet machine (granulator).
Feed pellet machine
1. Heat to remove the excavated material, then polish the fine sandpaper with motor oil, and then gradually wipe off those carbonized black spots.
2. Be able to use manual methods. Manually replace the net, open the net by hand and shovel the plastic mold with a small shovel.
3. Identify the fire and tear it off while it is hot.
| Model | Main Power | Capacity(kg) | Size(cm) |
| 125 | 4KW | 60-80 | 105*34*61 |
| 150 | 4KW | 100-120 | 105*34*61 |
| 160 | 4.5KW | 120-150 | 105*34*61 |
| 210 | 7.5KW | 150-300 | 120*44*76 |
4. Gas welding is labor-saving, but it is not environmentally friendly and is not very good for the equipment.
5. Find a soluble solvent that can be dissolved, the cost is high, and the feasibility is poor.
For the ring die feed pellet machine, cleaning and maintenance are very important. The feed pellet machine should be maintained regularly during use, and timely cleaning can extend its service life.