How Does The Solid Waste Briquetting Unit Operate?

Installation of solid waste briquetting machine: Place the briquetting machine on a solid, flat ground. The loading conveyor is in place, adjust the distance from the opposite port of the briquetting host and seal it. The discharging conveyor is in place and the combination position with the briquetting host is adjusted. The electrical control cabinet is in place and the incoming and outgoing lines are connected. Before starting the machine, it is necessary to preheat and raise the temperature. Turn on the heating switch. The temperature rises to 100~120℃ before starting the machine. First press the "host forward" start button. After the host runs for 30 seconds, then press the "loading conveyor" start button, and finally press "Outfeed conveyor" start button.

Stop sequence: Prepare wet materials with a moisture content of about 50%, and increase the amount from small to large according to the discharge of bulk materials until all the die holes are discharged with bulk materials. First press the "Loading Conveyor" stop button, wait until the host die hole no longer discharges material, then press the "Host Stop" button, and finally press the "Discharging Conveyor" stop button. After the host is stopped, it is started twice and stopped twice, with an interval of 1 to 2 minutes each time. We are a manufacturer specializing in the production of solid waste briquetting machines. We also produce various types of equipment. If you have any questions or needs about our products, you can call us for consultation at any time. We will serve you wholeheartedly. At the same time, we also We will provide qualified products to ensure that the failure rate is reduced. We also do a good job in after-sales service, so please feel free to purchase.