Five notes to prevent static electricity hazards of wood pellet mill
The use of wood pellet machine will often encounter static electricity, for the sake of everyone's safety, how should we prevent static electricity?
1, before the use of pellet machine manufacturers remind you of the need to check the pellet machine electrostatic grounding fastened without defects, or shall not be grinding wet powder operation.
2, the pellet machine in the grinding of wet powder when using a single pellet machine, need to be wet powder barrels by barrel from the centrifugal room transported to the grinding room, grinding a barrel after the transportation of a barrel to prevent particles from collecting the formation of space acetone concentration is high.
3、Pellet machine manufacturers recommend that personnel to use the pellet machine can be when the mask, laundry gloves, wear anti-static underwear and conductive shoes.
4, use from time to time to stop the use of wet powder hammer, stainless steel barrel knocking granule machine silo, to prevent the occurrence of electrostatic sparks.
5, check the temperature and humidity meter next to the pellet machine, unless the humidity is more than 50%, such as the space humidity is below 50% it is necessary to use the post of the spray bottle for part of the humidification, until the space humidity reaches more than 50% and then the pellet machine operation.
