Do you understand the production process of pellet mill? Check the temperature of the granular material. Take granular material for durability test and check the powder content of the finished product. Check the gap of crushing roller. Check whether centrifugal dust collector return pipe and grading screen return pipe are blocked. The above work is carried out every 4H.
Record various production parameters, such as production time, material temperature, durability, powder content, production varieties, production tonnage and efficiency. Pay attention to the control panel, coordination of packaging and granulation, in order to return to the front and timely detection of various problems, timely treatment and reduce losses, such as timely inspection of the material in the powder content is not too high, whether there are small pieces of material, whether the material temperature is more than the standard and so on.
At the end of production, the shutdown order is opposite to the start-up order, and the related equipments are shut down from front to back according to the process flow. When the pellet mill bin low level indicator shows no material, open the manual feeding door of the pellet mill and observe the material flow in the feeding port. When the material flow is obviously reduced, let the cooler unload manually and increase the return material flow, in order to increase the material flow in the feed port of the pellet machine and ensure the quality of granulation. At this time, pay attention to whether the return pipe is blocked.
