Difference between wood pellet mill and feed pellet mill
Whether it is wood pellet mill, or feed pellet mill, all the pellet mill development trend in the need for a very large number of products. However, one is specialized in producing wood pellets and the other is specialized in crushing poultry feed, which are used in different industries. Therefore, in many levels there is a very big difference, the following small introduction to the difference between wood pellet mill and feed pellet mill.
1. Machine and equipment operation is not the same: wood pellet machine is put vertically on the roller shaft, large and medium-sized cast steel parts with seat bearings, its large rolling bearings do not bear all the work pressure, not easy to be bad, long life, and feed pellet machine in the whole process of pressing, particles because of extrusion molding will be high temperature.
2. The feeding method is not the same: the mold of the wood pellet machine is placed, the mouth up, by rising down directly into the pelletizing mold, the proportion of wood chips is very light, straight up and down, the wood chips into the after the pressure rollers rotating thrown to the surroundings, proportionality of the suppression of granules, and feed pellet machine molds placed vertically, by rising down.
3. Equipment construction is not the same: wood chip pellet machine upward open, easy to exhaust heat, in addition to a set of wind full-automatic oil, while the feed pellet machine granulation room is sealed.
4. Pressing method is not the same: wood pellet machine is mainly pressure wheel change, the mold does not move, granular matter is not easy to be the second shake, while the feed pellet machine is the mold turn, the pressure roller does not move, high-speed operation, high production capacity.
Wood pellet machine and feed pellet machine must pay attention to the difference between good, because the main purpose is not the same, therefore, in the selection of the case do not have to worry too much, only according to the actual requirements to carry out the selection, so that we pick the right, and then enhance the effectiveness of the work.
