Detailed Explanation Of The Operation Process Of The Fish Feed Extruder

1. Preliminary preparation
First, ensure the cleanliness and maintenance of the fish feed extruder, and make preliminary preparations after fully checking the equipment. Including preparing materials such as starch, water and extruder, confirming the normal operation of the feeder and conveyor belt, and ensuring that all control valves are in the closed state.
2. Start
1. Turn on the power: Press the power switch, and after power is turned on, press the start button to start the motor.
2. Adjust the feed amount: According to different processing requirements, after adjusting the feed amount of the feeder, you can open the control valve and feed the feed port.
3. Feeding
When feeding, you need to operate according to the specific requirements of the equipment. Pay attention to using the appropriate feed port for feeding, and master the feed amount and feeding time.

4. Debugging
During debugging, it is necessary to adjust the heating temperature, water volume, check valve and air volume of the extruder to ensure smooth feed processing. At the same time, it is necessary to continuously monitor during the debugging process to check whether the equipment is running normally.
5. Operation monitoring
When the equipment is running, pay close attention to parameters such as temperature and pressure, and adjust the control valve and flow at any time. At the same time, the equipment needs to be inspected and maintained regularly during operation to ensure the normal operation of the fish feed extruder.
6. Shutdown
When the fish feed extruder is processed, it is necessary to twist the shutdown switch and close the control valve. After shutdown, the equipment needs to be cleaned and maintained to ensure the normal operation of the equipment when it is used next time. If it needs to be shut down for a long time, it is also necessary to carry out rust prevention and maintenance according to the equipment requirements.