Common faults and troubleshooting methods of turfgrass machine Troubles of turfgrass machine 1: The machine has large vibration or strong noise. Cause: The weight difference between the two sets of hammers is too large; individual hammers are not thrown away by the circlip; the bearing is damaged; the spindle is bent and deformed ; The weight difference of other parts on the rotor is too large, causing the rotor to be unbalanced. Remedy: Match the hammers so that the weight difference does not exceed 59; the hammers can rotate flexibly; replace the bearings; straighten or replace; balance the rotor.
Trouble of the straw machine 2: jamming and abnormal sound. Reasons for the fault: the screws of the fastening machine are loose; the blade gap is too small; metal, stones and other hard objects enter the machine. Remedy: Check whether the cutter head and fastening screws are loose; if they are loose, they should be tightened, and the blade gap should be adjusted to the standard requirements; shut down for inspection, and open the casing to remove foreign objects. Trouble 3 of the guillotine machine: overheating of the bearing. Reasons for the fault: too much grease, too little or poor grease; bearing damage; main troubleshooting method: add grease as required; replace the bearing; straighten the main shaft, balance the rotor; replace the oil seal; reduce feed The number of people; adjust appropriately.