1. Low output
Fault cause:
1. The gap between the pressure roller and the flat die is too large;
2. The pressure roller or flat die is seriously worn;
3. The moisture content of the material is too high or too low;
4. The flat die has poor finish when the die hole is used for the first time;
5. The V-belt is slipping or aging;
Troubleshooting method:
1. Tighten or replace the V-belt
2. Grind and lubricate with oil-containing materials, and the output will increase after working for a period of time;
3. Adjust the moisture content of the material;
4. Adjust the clamping bolt;
2. Abnormal sound
Fault cause:
1. Loose parts;
2. Damaged bearings;
3. Hard debris falls into;
Troubleshooting method:
1. Tighten the parts;
2. Replace the bearings;
3. Stop the machine to remove foreign objects;
| Model | Capacity | Power |
| 125 | 80-100kg/h | 3kw |
| 150 | 120-150kg/h | 4kw |
| 210 | 200-300kg/h | 7.5kw |
| 260 | 500-600kg/h | 15kw |
| 300 | 700-800kg/h | 22kw |
| 360 | 900-1000kg/h | 22kw |
3. Sudden stop
Fault cause:
1. Foreign objects enter the cavity;
2. Excessive load (even fuse blown);
Troubleshooting method:
1. Stop the machine to remove foreign objects;
2. Appropriately increase the gap between the roller and the flat die to replace the fuse;
In addition, the feed pellet machine just received will not reach the normal output. This is a normal phenomenon, because the pellet machine is all new, and the pellet machine that has just been run has not reached the ideal operating state. After the machine has been used for a period of time, the pellet machine's various parts have been run-in to the ideal state, and the pellet machine's output and discharge quality will reach the rated output state.