Characteristics of biomass fuel produced by wood pellet mill
MIKIM Machinery has been providing high quality wood chip pellet mill equipment to our customers since its establishment. The wood chip pellet mill equipment is fueled by renewable biomass energy source, which realizes the sustainable use of energy. It adopts high temperature segmented combustion technology, with low emission of NOX, SO2, dust, etc. in the flue gas, which is the best substitute for fuel oil (gas) burner, electric heating, etc.; there is no emission of various wastes, such as tar and wastewater, etc.: it adopts high-temperature cracking combustion technology, and tars and other tars are directly burned in gaseous state, which solves the technical difficulties of high tar content of the biomass gasification, avoiding the water-washing tar brought about by the high tar content. It solves the technical problem of high tar content in biomass gasification, avoids the secondary pollution of water quality brought by washing tar, and has low operation cost, etc. Xingfa wood pellet mill has a reasonable institutional design, and is used in a variety of equipments with low transformation cost. When running than the oil boiler heating cost reduced by more than 60%, than the gas boiler heating cost reduced by more than 40%, is the electric furnace, oil furnace, gas furnace energy saving and environmental protection transformation, the best choice for the replacement. Wood pellet mill is easy to operate and maintain, adopting frequency conversion automatic feeding, wind power to remove dust, simple operation, small workload, a single person on duty can be, wood pellet mill is the best choice for the majority of enterprises.
