Wood crusher maintenance in several steps

The recycling of waste wood can not be separated from the wood crusher equipment, but because the wood crusher is a crushing machinery and equipment, so after a long time of use there will inevitably be some wear and tear and damage to the situation, this time we need to carry out maintenance and maintenance work, but in the maintenance process is also in strict accordance with the relevant requirements to carry out, then the wood crusher maintenance in several steps?
1. each time we start the wood crusher before the need to carry out a hidden problem check to see whether the various components in place, screws, nuts, bolts and other parts used to fasten the situation is not loose, if found loose we need to tighten the work, to confirm that there is no error can start the power for production operations; 2.

After the end of the production operation requires us to wood crusher maintenance and maintenance work, first we need to cut off the power, and then open the body after the wood crusher is completely still, check the use of vulnerable parts, such as blades, bearings, screens, belts and so on the use of the corresponding records, and check whether the surface of these parts are worn or damaged, if There is a need to repair work in a timely manner, but some serious wear or damage can only be solved by replacing the new parts, then we need to clean up the material residue inside the wood crusher will be reinstalled after the body can be.