Before starting the pellet machine, the machine should be fully cleaned and inspected, whether the transmission bearing is tightened; then connect the motor and observe whether the motor rotates according to the direction indicated by the sign.
Check the distance between the pressure wheel and the template of the pellet machine, generally between 0.1-0.3mm, can be adjusted by the "pressure screw" of the pressure wheel. When testing the pelletizer, take 15kg of powder and use rice bran. If not, you can also use 5kg peanut meat and 15kg wheat husk instead. Powder configuration, test pressure, repeated rolling extrusion for 15 minutes, can not be unpressurized, until you can produce normal pellets.
If the user can't press the pellets with his own recipe, the pellet machine is opened in the grinding tool hole, apply some edible oil on the surface of the mold, and then repeat the above process. After the raw material of rice bran or peanut meat with wheat bran is pressed out, add fine sand construction and press repeatedly for about 10 minutes until the material is discharged normally. The length of the pellets produced by the pellet machine can be realized by the up and down position of the cutter of the rice husk pellet machine.
