What should I do if the biomass briquetting machine fails?

                   When the gap between the biomass briquetting machine mold and the pressing wheel exceeds 5mm, the output of the equipment will be seriously affected, and the phenomenon of swallowing the machine will occur. Adjust the gap as follows:

                  Use a hook wrench to loosen the round nut of the biomass briquetting machine, remove the pressure wheel connecting plate, use an inner hex wrench to loosen the eccentric shaft locking screw clamped by the scraper, and then use a wrench to turn the flat shaft of the eccentric shaft head to make the eccentric The eccentric part of the shaft rotates outward to adjust the gap between the pressing wheel and the male mold. Use the same method to adjust the other pressure wheel (it is required that the upper and lower gaps between the two pressure wheels and the processing die mouth and the height of the edges of the two pressure wheels are the same).