The material requirements of the corn stalk pellet machine are actually relatively strict. For the materials to be processed, the following requirements must be met for better production.
1. The size of the material after crushing is required. Before entering the straw pellet machine, the straw and other materials must be crushed by the straw pulverizer before entering the corn straw pellet machine, and the size of the damaged area should match the diameter of the straw pellet machine you want to make and the aperture size of the straw briquetting machine mold. The size of the damaged particles will directly affect the output value of the straw pellet machine, and even produce no material.
2. The material itself must have adhesive force. If the material itself has no cohesive force, then the commodity extruded by the straw briquetting machine is either not formed or not loosened, and will be broken after transportation. Therefore, if you see a material that has no adhesive itself but can extrude particles or lumps, then the material must have moved its limbs, or something that has been fermented or added a binder. This is also important.
3. The moisture of the material is strictly required. When entering the pellet machine, the moisture content of the damaged material must be kept within a certain range. If it is too dry, it will affect the forming effect. If the moisture content is too large, it is easy to loosen. Therefore, the moisture density of the material will also affect the output value of the briquetting machine. However, the moisture content of the products must reach below 13% before they are sold. This 13% standard is the standard that the corn stalk pellet machine products will not mold or deteriorate.
The corn stalk pellet machine is of great significance for the optimal utilization of straw resources. First, it completely solves the problem of open burning or accumulation. Second, it expands new channels for increasing agricultural production and income. Third, it has great value in environmental improvement. The straw pellet machine uses sub-granulated crop straw as fuel, which is only the tip of the iceberg in the promotion of the optimal utilization model of crop straw resources in my country, but we have found the determination of the whole country to promote the work of straw resources. The comprehensive utilization of crop straw is most important in action. The straw pellet machine will make more and more contributions to turning waste into treasure, and the ecological and environmental effects will become more and more obvious.