1. Preparation: prepare the raw materials, pay attention to cleaning impurities and stones, and mix the raw materials.
2. Turn on the equipment: preheat the extruder. The preheating time varies according to the equipment model, and generally takes about 20-30 minutes.
3. Adding materials: put the mixed raw materials into the hopper of the extruder, and add water according to the requirements of the equipment.
4. Start production: Start the equipment to start production, pay attention to observe the operation of the equipment, and ensure that the equipment operates normally.
5. Collect finished products: After production is completed, collect the finished products, pay attention to cleaning the equipment to prevent impurities from remaining.
| Model | 100 | 120 | 135 | 160 |
| Power | 37KW | 55KW | 75KW | 90KW |
| Yield | 700-1000 | 1200-1500 | 1500-1800 | 2000-2400 |
| Weight | 750KG | 850KG | 950KG | 1200KG |
| Size(mm) | 1970*2900*1150 | 2200*2900*1200 | 2350*2900*1200 | 2350*2900*1400 |
Precautions for use
1. Please select the appropriate amount and speed according to the equipment specifications to reduce the phenomenon of frequent equipment shutdown.
2. Prevent machine overload: pay attention to the amount of feed and control the feeding speed appropriately.
3. Clean the machine: Clean all parts of the extruder in time after use to ensure the normal life of the equipment.
4. Regular maintenance: Maintain the fish feed extruder according to the maintenance cycle to extend the service life of the equipment.