Moreover, the feed pellet machine has a simple structure, small footprint, low noise, and can generally be operated with a little learning.
1. The feed inlet and agitator of the feed pellet machine are blocked, and the blockage should be cleared in time
2. The die hole of the pellet machine is blocked, and the die hole should be opened
3. The moisture content of the raw material is too high or too low
4. The gap between the grinding disc and the roller of the feed pellet machine is improper, or the combination is improper, or the wear is serious, which will also cause the feed pellets to not be produced
5. The feed pellet machine has been placed for too long, has not been used for a long time, and has not been maintained for a long time, resulting in the rust of the grinding disc and roller, affecting the pellet production.
| Model | Capacity | Power | Dimension |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm |
| 150 | 120-150kg/h | 4kw | 115*35*80cm |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm |
| 260 | 500-600kg/h | 15kw | 138*46*100cm |
| 300 | 700-800kg/h | 22kw | 130*53*105cm |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm |
The new machine is not run-in with lubricating oil or the run-in is not enough, the aperture is rough and not smooth, and the holes are uneven and not vertical, which will also cause the pellets to not be produced.
The material is not fully crushed, resulting in the particles of the material entering the pellet machine being too large to be pelletized, so no material is produced.
Check whether the voltage is stable.
The operator does not understand the performance and operation methods of the rabbit and sheep feed pellet machine, resulting in the failure of pellet production due to improper operation.
When the person is operating, the material is fed too fast, resulting in the blockage of the machine grinding disc hole, resulting in the phenomenon of no pellet production.