Firstly, it is the running in of the new feed pellet machine, including the running in of the new grinding disc. At the beginning, the particles may not be formed and the speed may be slow. Don't worry about this, it is normal because the holes in the new grinding disc are not smooth. While running in the new grinding disc, you can adjust the blades, operating direction, etc. to achieve the desired results and become proficient in the operation.
In addition to the pellet machine, we also need to consider the raw materials for making pellets, as well as the ratio of raw materials. In terms of ratio, it is best to have a ratio of 2:3 between coarse feed and fine feed. If the proportion of coarse feed is relatively large, more pellet feed powder will be produced. We also need to control the moisture content of the raw materials.
