How to install the blade of the wood crusher?

Wood crusher and other equipment principles focus on the blade, wood crusher blade how to install and composition.

1, fastening the flying knife and the bottom knife, it is necessary to use the torque wrench and torque increaser can be accurate torque, according to the rules torque value fastening.

2, chipper flying knife bolts and bottom knife bolts are special high-strength bolts (bolt head symbol), must not be replaced with the usual bolts to prevent the onset of problems, must not be replaced with the usual bolts to put the onset of problems, the use of high-strength bolts for 1 year, after 1 year of use, it is necessary to replace all.

3, it is necessary to replace the flying knife sets, sharpening, two flying knife sharpening amount should be common, to ensure that each set of flying knife portion common, to ensure that each set of flying knife portion common, so as not to cause machine oscillation.

4, flying knife and bottom knife sharpening necessary to add coolant, to prevent the blade overheating burn or produce rolled edge scene, to ensure that the blade wear resistance
5, the flying knife usually 1-2 class sharpening once, after the flying knife for 4 times, the bottom knife should be withdrawn: ① check the condition of the bottom knife, replace the bottom knife.

① Check the condition of the bottom knife, replace the bottom knife edge (bottom knife usually has 2-4 edge, an edge wear, replace another edge to use, to be all edge wear, a sharpening).

② The contact surface of the bottom knife seat should be smooth, in order to facilitate the replacement of the bottom knife, easy to draw the bottom knife seat.

6, flying knife adjustment scale for the fixed value, do not allow changes, if the flying knife and the bottom knife gap does not meet the requirements of the rules, only allow the adjustment of the bottom knife scale.