1. When buying a straw pellet machine, you should choose a model with a slightly higher output value than yourself. During the use of the machine, the wear of the machine mold is inevitable, which leads to a decrease in output value. Therefore, choosing a model with a slightly higher output value can ensure that the output value can complete the work on time.
2. The quality of the straw pellet machine is the key. Before buying a pellet machine, you should first check the manufacturer's production qualifications to confirm whether it comes from the manufacturer. Don't be fooled by some intermediaries to make money and then suffer losses in vain.
3. The after-sales service of the straw pellet machine cannot be careless. Before purchasing a pellet machine, you should consult the manufacturer's after-sales service to determine whether the after-sales service of the machine is perfect, and write the relevant after-sales terms in the purchase contract.
| Model | Capacity | Power | Dimensions |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm |
Before using the pellet machine, you must check whether the electrostatic grounding of the pellet machine is intact. Otherwise, grinding operations are not allowed.
It is forbidden to use a pellet machine. Stainless steel barrels knock on the pellet machine silo to avoid static sparks.
People can use the pellet machine at any time. Wear anti-static underwear and laundry gloves with static conductive shoes.
When grinding wet powder, use a single granulator to transport the wet powder barrel from the centrifugal room to the grinding room. Grind one barrel and transport one barrel to avoid high acetone concentration in the space due to particle aggregation.
Before grinding, check the thermometer and hygrometer next to the pellet machine to confirm that the humidity is above 50%. If the space humidity is lower than 50%, it is necessary to use a post spray pot for local humidification until the space humidity reaches more than 50%, and then use the pellet machine for operation, otherwise it is not allowed to use the pellet machine for particle operation.