As we all know, in order to ensure the normal operation of the feed pellet machine, we need to add gear oil to the machine every once in a while.
The gear oil of the feed pellet machine is not added casually, and certain requirements need to be followed, or some places need to be paid attention to, as follows:
First of all, we need to know that the more oil is added to the feed pellet machine, the better. Lubricating oil should be added according to the instructions and the oil gauge, sight glass, etc. observed daily. If too much oil is added, it will have certain side effects.
| Model | Main Power | Capacity(kg) | Size(cm) |
| 125 | 4KW | 60-80 | 105*34*61 |
| 150 | 4KW | 100-120 | 105*34*61 |
| 160 | 4.5KW | 120-150 | 105*34*61 |
| 210 | 7.5KW | 150-300 | 120*44*76 |
| 230 | 11KW | 300-500 | 120*48*80 |
Secondly, the additives added to various lubricating oils are different, and the performance they show is also different. Therefore, it is necessary to select suitable lubricants according to the equipment conditions and the use environment, so as to achieve a good lubrication effect.
In addition, it is necessary to remember that waste oil cannot be used directly, which will increase the damage to the pellet machine.
In short, everyone must pay attention to these details when adding gear oil to the feed pellet machine to extend the service life of the machine and ensure the use effect.