Pellet feed coarseness, fineness, length and moisture temperature are handled. Coarse and fine is completed by replacing the molds with different apertures, flat die pellet mill generally has a long and short adjustment cutter at the discharge port, which can be adjusted according to the actual needs of feeding is easy to short, commercial storage and transportation is easy to long.
The focus of work before and after the shutdown of the pellet machine. In the material pressing is coming to an end, a little bit of bran mixed with cooking oil and put into the machine, pressing 1-2 minutes after the shutdown, so that the mold holes are filled with oil, so that the next time the machine can be opened to cast production, both maintenance mold, but also to save working hours. After stopping the machine, loosen the adjusting screw of the press wheel and remove the residual material.
